COUPLER SET BRS 5PC

The heavy-duty 231C impact wrench has the reliability and durability you have come to expect from the Ingersoll Rand name. The powerful tool provides an even impact and is durable enough to last through the toughest work environments.

We added to the original MARVEL Mystery? oil to create a specially formulated tool oil for use in all piston type and rotary air tools, as well as in-line air lubricators. MARVEL? air tool oil prevents rust formation in air tools while providing positive lubrication for smoother starting, longer lasting tools. MARVEL? air tool oil assures the maximum performance of your tools by dissolving gum and sludge that reduce tools speed and power.

19-piece kit contains all accessories needed to connect and use a tank-mounted air compressor.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

AIRHOSE RBR 3/8X50 CPLD 1/4NPT
This Air hose is suitable for a wide range of industrial construction and agricultural applications.

Tru-Flate? airline filters are used for all airline applications where efficient filtration is required. Filtration removes airborne solid contaminants, pipe scale, rust, condensate and more, which may cause wear or failure of pneumatic components. Large filter element surface gives low pressure drop and long element life.

General Information Product Category Air Compressor - Portable Motor Voltage 115 Volt AC Phase 1-Phase Magnetic Starter No Amp Draw 16 Engine HP 2 Pump CFM 5.2 CFM Rated @ 90 PSI Pump Material Solid Cast Iron Max PSI 135 PSI Oil Sight Glass Yes Pump Type Single-Stage After Cooler No Pump Drive Belt Drive Oil Type Oil Lubricated Pump Low Oil Shut-off No Tank Tank Size 20 Gallons Tank Outlet 1/4 Inch Electronic Drain Valve No Tank Orientation Vertical Overview Product Category Air Compressor - Portable Weight 200 Pounds Certification UL Product Length 22 Inches Product Width 23 Inches Product Height 43 Inches Power Type Electric UPC 678384634014

CONNECTOR FEMALE BRS 1/4 NPT

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.

This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.

Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.